GB.T 50381-2018 Standard for Construction Quality Acceptance of Automatic Fare Collection System Engineering in Urban Rail Transit

Ministry of Housing and Urban-Rural Development of the People's Republic of ChinaChina Planning Press · ChinaOct 2020

Rating 3.9
Word count
43K words
Chapters
79

Tags

Programming Public FacilitiesUrban TrafficEngineering PracticeTechnical ProtocolsIntelligent TransportationTicketing SystemQuality ControlAcceptance Code

Summary

This standard applies to the quality acceptance of urban rail transit automatic fare collection system engineering for new construction, expansion, and reconstruction projects.

Editor's review

This standard is the dedicated basis for quality acceptance of urban rail transit automatic fare collection system engineering, covering new construction, expansion, and reconstruction projects, with a focus on converting acceptance requirements into executable judgment rules for inspection lots, sub-item works, and sub-division works. Its value lies in unifying acceptance criteria and reducing disagreements among construction, contracting, supervision, and operating parties over quality determination. The content emphasizes procedures, inspection methods, and conformity judgment, making it suitable as a reference tool during project acceptance rather than an introductory text on system principles or equipment selection. When reading, it should be used alongside the specific project's design documents, contract requirements, and current related standards, with particular attention to acceptance record forms, sampling ratios, and concealed work acceptance. For engineering and technical personnel who need to prepare acceptance plans or handle quality disputes, this book provides fairly direct basis; for readers who merely want to understand how automatic fare collection systems operate, other technical materials are needed.

Who it's for

A good fit for

Not a good fit for

Reading tips

  1. Read the terminology and general provisions first, then look up the corresponding sub-item acceptance clauses by project section
  2. Prepare design documents and acceptance record forms alongside reading, checking sampling ratios and judgment conditions as you go
  3. Highlight clauses related to concealed work and system integrated testing for quick retrieval during on-site acceptance
  4. When encountering content that intersects with other current standards, list them and verify them together rather than using this book in isolation

About the publisher

China Planning Press China

China Planning Press is a central-level publishing institution directly under the National Development and Reform Commission. Guided by the mission of "spreading the wisdom of development and reform and serving national economic construction," it publishes academic books on macroeconomic policy, economic research, and business management, as well as engineering construction standards, codes, and quotas. Its catalog of about 2,817 titles focuses on industrial technology and architecture, with representative publications including the Code for Design of Automatic Fire Alarm Systems, the Code for Fire Protection Design of Buildings, the Standard for Design of Building Water Supply and Drainage, the Standard for Fire Protection Design of Petrochemical Enterprises, and the Standard for Geotechnical Testing Methods. Its authors come largely from specialized institutions and competent authorities such as the Shenyang Fire Research Institute of the Ministry of Public Security, SINOPEC Luoyang Engineering Co., Ltd., Shanghai Xiandai Architectural Design (Group) Co., Ltd., and the Ministry of Housing and Urban-Rural Development, the Ministry of Water Resources, and the Ministry of Industry and Information Technology, reflecting a distinctive profile centered on engineering construction standards and codes while also covering academic publishing in economics and management.

Contents

  1. 版权信息
  2. 中华人民共和国住房和城乡建设部公告
  3. 前言
  4. 1 总则
  5. 2 术语
  6. 3 基本规定
  7. 4 线缆管槽安装验收
  8. 4.1 一般规定
  9. 4.2 线缆管槽敷设
  10. 4.3 线缆管槽接头和端口
  11. 4.4 电缆桥架的安装
  12. 5 线缆敷设及检测
  13. 5.1 一般规定
  14. 5.2 线缆敷设
  15. 5.3 线缆引入
  16. 5.4 线缆接续
  17. 5.5 线缆特性检测
  18. 6 设备安装与配线
  19. 6.1 一般规定
  20. 6.2 车站终端设备安装
  21. 6.3 机房设备安装
  22. 6.4 设备配线
  23. 7 车票与车票读写机具
  24. 7.1 一般规定
  25. 7.2 车票与车票读写机具检测
  26. 8 车站终端设备
  27. 8.1 一般规定
  28. 8.2 自动售票机
  29. 8.3 半自动售票机
  30. 8.4 自动检票机
  31. 8.5 自动充值机、自动验票机、便携式验票机
  32. 9 车站计算机系统
  33. 9.1 一般规定
  34. 9.2 车站计算机系统局域网
  35. 9.3 车站计算机系统基本功能检测
  36. 9.4 紧急按钮检测
  37. 10 中央计算机系统
  38. 10.1 一般规定
  39. 10.2 中央计算机系统局域网
  40. 10.3 中央计算机系统基本功能检测
  41. 11 票务清分系统
  42. 11.1 一般规定
  43. 11.2 票务清分系统计算机局域网
  44. 11.3 票务清分系统基本功能检测
  45. 11.4 容灾备份系统基本功能检测
  46. 11.5 网络化互联互通检测
  47. 12 电源、接地、防雷
  48. 12.1 一般规定
  49. 12.2 电源设备安装
  50. 12.3 接地与防雷
  51. 12.4 电源设备检测
  52. 13 AFC系统联调联试
  53. 13.1 一般规定
  54. 13.2 联调联试验收检测
  55. 14 单位工程观感质量
  56. 14.1 一般规定
  57. 14.2 线缆管槽观感质量
  58. 14.3 设备和配线观感质量
  59. 附录A 分部工程、分项工程、检验批划分和检验项目
  60. 附录B AFC系统工程质量管理检查和验收记录
  61. 附录C 单位工程质量验收记录
  62. 本标准用词说明
  63. 引用标准名录
  64. 条文说明
  65. 编制说明
  66. 1 总则
  67. 2 术语
  68. 3 基本规定
  69. 4 线缆管槽安装验收
  70. 5 线缆敷设及检测
  71. 6 设备安装与配线
  72. 7 车票与车票读写机具
  73. 8 车站终端设备
  74. 9 车站计算机系统
  75. 10 中央计算机系统
  76. 11 票务清分系统
  77. 12 电源、接地、防雷
  78. 13 AFC系统联调联试
  79. 14 单位工程观感质量

FAQ

What types of automatic fare collection system projects does this book apply to? According to the standard's scope, it applies to quality acceptance of urban rail transit automatic fare collection system engineering for new construction, expansion, and reconstruction. In use, it still needs to be combined with the specific project's design documents, contract agreements, and current related standards; the book alone cannot cover all acceptance situations.
Can non-rail-transit projects refer to it? This book targets urban rail transit automatic fare collection systems, and its acceptance objects and engineering conditions are fairly specific. If non-rail-transit projects refer to it, they need to assess whether their system composition, construction methods, and acceptance objectives align with the standard's assumptions; direct application is not advisable.
Should other materials be prepared while reading? It is advisable to prepare engineering design documents, construction contracts, supervision guidelines, and related current standards at the same time. This standard provides acceptance requirements and judgment bases, but specific inspection lot division, sampling quantities, and record forms often need to be implemented in conjunction with actual project documents.

This site is an index: you start “Search all sources” in your browser, and the entries it lists all point to third-party sites; please judge their availability yourself.

About the author

Ministry of Housing and Urban-Rural Development of the People's Republic of China Author

The Ministry of Housing and Urban-Rural Development of the People's Republic of China is a department under the State Council. It was established on March 15, 2008, through the restructuring of the former Ministry of Construction, and is located at No. 9 Sanlihe Road, Haidian District, Beijing. The Ministry is mainly responsible for housing security, housing system reform, urban and rural planning and construction management, construction market supervision, the engineering construction standards system, and building energy efficiency. In publishing, it has organized the compilation of a large number of engineering construction standards and technical specifications, with 241 works in the collection. These cover building area calculation, acceptance of construction quality for building foundations, outdoor water supply and drainage design, low-voltage power distribution design, design of high-rise structures, cable design for electric power engineering, and design of automatic sprinkler systems. They are commonly classified under industrial technology and architecture. These standards and specifications provide unified technical bases for building design, construction, and acceptance, and have wide influence in the industry.